Changing Settings

(Hint: Run WorldClock Lite and refer to the screen while reading this documentation page
from a printout.)
__________________________________________________________________________

Select Change Settings from the WorldClock Lite menu in the menu bar 
at the top of your screen.  

In WorldClock Lite, the operational controls on the Change Settings screen  
Include the date and time and the Select Location button.  You can't add to
or modify the 190-location database that comes with WorldClock Lite.

The features of the Change Settings screen most likely to be used by demo users are 
the Select Location button and the time-setting facilities in the lower left of the
screen.  Click on the Select Location button to bring up a scrolling list of 190 
worldwide locations.  Scroll through the list and find one close to you, or of interest
                                          to you.  Click on the desired location and then click
                                            the Select button, or just double-click on the location.
                                             
If the location you select is in a different time zone, WorldClock will adjust the hours
automatically for the difference in time zones. 

                                         After setting the location, check the time in the digital clock 
                                           readout at the lower left of the display.  If you need to adjust 
                                           the hour, click on the hour in the lower left hand corner of the 
                                           screen.  The hour will be highlighted and an up-down arrow 
                                           will appear.  Click on the up arrow to adjust the hours ahead 
                                           and on the down arrow to adjust the hours back.  When the 
                                           hour is correct, click on the blank area of the window to the 
                                           left of the hour.  Similarly, you can adjust the minutes, sec-
                                           onds, or AM/PM settings.  

                                           Other settings that can be adjusted in the same way are the 
                                           day, month, and year.  Since WorldClock Lite does not 
                                           permit additions to the database, the latitude, longitude,
                                           and time zone readouts are informational only, and cannot
                                           be set.

If you have made any changes to any of WorldClock Lite's settings, including time,
date, or location, or reset the location of any of the clocks, WorldClock Lite will ask 
you if you wish to save the changes when you quit.  If you click the Save button, the 
changes will be saved for your next sesson.  The system clock will also be set to the 
current time displayed by WorldClock Lite.  If you have just been experimenting,
and don't want the changes saved, or don't want your system clock to be reset, click the 
No button.